Siemens SINUMERIK 840DE sl Commissioning Manual page 1024

Fundamentals
3.5 Notes on the easyscreen.ini
3.5 Notes on the easyscreen.ini
As of SINUMERIK Operate V4.7, the easyscreen.ini has been extended by the entries
described in this section. The easyscreen.ini can be found in the
cfg directory.
Help screen start position
Entry in easyscreen.ini:
[GENERAL]
HlpPicFixPos=true
Note:
The start position of help displays is positioned at the configured pixel position independent of
the resolution (default=true).
Elongation behavior, default line height and line spacing
Entry in easyscreen.ini:
[GENERAL]
SymmetricalAspectRatio=false
DefaultLineHeight=18
DefaultLineSpacing=3
Notes:
● The "SymmetricalAspectRatio" entry determines whether the same aspect ratio is used in
the X and Y direction when adapting a configuration to a specific screen resolution.
– "false" (default): Fields and graphics are shortened in widescreen resolution in the Y
– "true": The same aspect ratio is used in the X and Y direction and fields and graphics
● The entries "DefaultLineHeight" and "DefaultLineSpacing" can be used to specify the
default line height (default: 18 pixels) and the default line spacing (default: 3 pixels) in
relation to 640x480. They only take effect when no Y position or height is specified in the
configuration for the position of the short text or the input/output field.
38
direction (asymmetrical elongation in relation to 640x480). For example, a square
configured in 640x480 is shortened vertically for a widescreen panel and becomes a
rectangle.
retain their originally configured proportions in relation to 640x480. For example, a
square configured in 640x480 remains a square in a widescreen panel.
[System Siemens directory] /
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1