Siemens SINUMERIK 840DE sl Commissioning Manual page 1223

Figure 7-13
setIntegralFillMode – fills the areas between points, lines and arcs and the X axis
Syntax:
Description:
Parameters:
Example
Figure 7-14
Figure 7-15
repaint, update – update view
Syntax:
Description:
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
Example - PolylineMode: To
ReturnValue = CallCWMethod
Areas between points, lines and arcs of the X axis are filled with the current fill
color (independent of whether the points are +Y or –Y).
This function is contour-specific, and can be activated and deactivated on a seg‐
ment-for-segment basis.
GraphVarName
Return Value
SetIntFill
Example - setIntegralFillMode: on
Example - setIntegralFillMode: Off
ReturnValue = CallCWMethod
ReturnValue = CallCWMethod
Using this function, you can manually refresh the display.
7.5 SIEsGraphCustomWidget
(GraphVarName, " setIntegralFillMode ", SetIntFill)
Name of the display variable which contains a SlEs‐
GraphCustomWidget
Error code (bool): TRUE = successful
IntegralFillMode (bool): TRUE = on
(GraphVarName, " repaint ")
(GraphVarName, " update ")
Graphic and logic elements
237