Siemens SINUMERIK 840DE sl Commissioning Manual page 1048

Dialogs
4.2 Defining softkey menus
4.2 Defining softkey menus
Definition
The term softkey menu is used to refer to all the horizontal and vertical softkeys displayed on
a mask. In addition to the existing softkey menus, it is possible to define other menus, which
partially or completely overwrite the existing menus.
The names of the softkeys are predefined. Not all softkeys need to be assigned.
HSx x 1 - 8, Horizontal softkeys 1 to 8
VSy y 1 - 8, Vertical softkeys 1 to 8
The definition of a softkey menu (softkey menu definition block) is basically structured as
follows:
Definition block
//S...
HSx=...
PRESS(HSx)
LM...
END_PRESS
//END
Description
Properties are assigned to softkeys during definition of the softkey menu.
Programming
Syntax:
Description:
Parameter:
Syntax:
Description:
Parameter:
62
Comment
;Start identifier of softkey menu
;Define softkeys
;Method start identifier
;Actions
;Method end identifier
;End identifier of softkey menu
(Identifier)
//S ;Start identifier of softkey menu
...
//END ;End identifier of softkey menu
See also Section Extended configuration syntax (Page 43).
Defines the softkey menu
Identifier Name of the softkey menu
Text or image file name
(Text[, access level][, Status][, Alignment of the softkey image][, text align‐
SK =
ment referred to the softkey image])
Define softkey
SK Softkey, e.g. HS1 to HS8, VS1 to VS8
Section reference
See Chapter Methods
(Page 126)
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1