Siemens SINUMERIK 840DE sl Commissioning Manual page 1031

3.8 SmartOperation and MultiTouch operation
You have the following setting options for specific adjustment to SmartOperation and for
MultiTouch operation:
● Automatic adjustment of the field height and field width to the so-called minimum usable
field size and the line spacing (mask attribute MA).
● Optimized and pixel-precise stretching of the fields for higher resolutions (mask attribute
PA).
● Setting of the field height and line spacing proportional to the font (mask attribute FA).
● Allows free scrolling so that the input field is not covered by the virtual keyboard (mask
attribute KM).
Further details can be found in Chapter Defining dialog properties (Page 49), Section
"Programming".
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
3.8 SmartOperation and MultiTouch operation
Fundamentals
45