Siemens SINUMERIK 840DE sl Commissioning Manual page 1486

Configuring the system
2.4 Configuring the SITOP UPS module for use with the PCU Base Software
3. Switch to the "Floating operation" tab and make the following settings:
– Deactivate the "Display monitoring window after" checkbox
– Click directly in the text field at "Start application after" and specify the path of the
– After you have specified the path of the
4. Confirm the settings with "Save."
66
Note
Deactivating the monitoring window
Display of the monitoring window can cause malfunctioning of the HMI software.
:
Shutdown.bat
C:\Program Files
(x86)\Siemens\MotionControl\siemens\sinumerik\hmi\base\Shutdown.bat
Note
Do not use the "Browse" button
The dialog can crash if you use the "Browse" button to specify the path of the
.
Shutdown.bat
Instead, enter the path directly in the text field.
after" checkbox. Optionally, you can specify the wait time after which the
is to be executed (e.g. 5 seconds).
, activate the "Start application
Shutdown.bat
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
Shutdown.bat
PCU-Basesoftware (IM8)