Siemens SINUMERIK 840DE sl Commissioning Manual page 1275

Reference lists
A.1 Lists of start softkeys
A.1.1 List of start softkeys for turning
Program operating area for turning
HSK1 HSK2
Edit Drilling
HSK9 HSK10
-- Straight-line
circle
(only for
ShopTurn)
Turning
The following tables list the possible start softkeys for turning technology. Assignments of
individual start softkeys can differ depending on the particular system. The specified OEM
softkeys are permitted for "Run MyScreens".
programGUIDE (G-Code) start softkeys:
Drilling
HSK2
VSK1 Centering
VSK2 Drilling ream‐
ing
VSK3 Deep-hole drill‐
ing
VSK4 Boring
VSK5 Thread
VSK6 OEM
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
HSK3 HSK4
Turning Contour turn‐
ing
HSK11 HSK12
-- --
Turning Contour turning
HSK3 HSK4
Stock remov‐ Contour
al
Groove Stock removal --
Undercut Stock remov‐
al residual ma‐
terial
Thread Grooving
Parting Grooving re‐
sidual material
-- Plunge-turn‐
ing
HSK5 HSK6
Milling Miscellane‐
ous
HSK13 HSK14
Measure Measure tool
workpiece
Milling
HSK5
-- Face mill‐ Contour
ing
Pocket Path
-- Multi-edge Predrilling
spigot
-- Groove Pocket
-- Thread Pocket
milling res. mat.
-- Engraving Spigot
A
HSK7 HSK8
Simulation NC select
HSK15 HSK16
OEM --
Miscellaneous
HSK6
Settings High
speed
settings
Swivel plane Parallel
axes
Swivel tool --
-- --
-- --
Subprogram --
289