Siemens SINUMERIK 840DE sl Commissioning Manual page 1040

Dialogs
4.1 Structure and elements of a dialog
NR
TA
MC
List of the mask-specific lan‐
guage files
Accessing the dialog properties
Read and write access to the following dialog properties is permitted within methods (e.g.
PRESS block).
● HD = Header
● HLP = Help display
● VAR = System or user variable
● MC = Mask background color
● CM = Column alignment (read-only)
54
NT1 Geometrical navigation (top, bottom, left, right), until the borders of the mask
are reached (standard in a normal Run MyScreens environment, e.g. area
"Custom")
NT2 Line-oriented, i.e. within the line to the right until the end of the line is
reached (standard, in the cycle masks of the editor)
Navigation direction when pressing the Enter key (Return Navigate Direc‐
tion)
NR0 NR0 = off (default), i.e. when pressing the Enter key, navigation is realized
within the mask in a tabular sequence (standard in the normal Run
MyScreens environment)
NR1 When pressing the Enter key, navigation is the same as when pressing the
up arrow key
NR2 As for NR1, however, downward
NR3 As for NR1, however, to the left
NR4 As for NR1, however, to the right
Tooltip alignment
TA0 Automatic (default)
TA1 Left
TA2 Right
TA3 Top
TA4 Bottom
TA5 Top left
TA6 Bottom left
TA7 Top right
TA8 Bottom right
Mask background color (mask color)
Example:
Set mask background color blue (= 6)
//M(MyMask/"MyMask"//////6)
or
PRESS(HS1)
MC=6
END_PRESS
separated by a comma
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1