Siemens SINUMERIK 840DE sl Commissioning Manual page 1276

Reference lists
A.1 Lists of start softkeys
VSK7 Positions
VSK8 Repeat posi‐
tion.
ShopTurn start softkeys:
Drilling Turning
HSK2 HSK3
VSK1 Drilling Stock re‐
centered moval
VSK2 Centering Groove
VSK3 Drilling Undercut Stock remov‐
reaming
VSK4 Deep- Thread
hole drill‐
ing
VSK5 Thread Parting
VSK6 OEM --
VSK7 Positions OEM
VSK8 Repeat --
position.
See also
Defining the start softkey (Page 33)
A.1.2 List of start softkeys for milling
Program operating area when milling
HSK1 HSK2
Edit Drilling
290
OEM Plunge turn‐
ing residual
material
-- >>
Contour turning
HSK4
New contour --
Stock removal --
--
al residual
material
Grooving --
Grooving re‐ --
sidual materi‐
al
Plunge-turn‐ --
ing
Plunge turn‐ OEM OEM
ing residual
material
>> <<
HSK3 HSK4
Milling Contour mill‐
ing
OEM OEM
<< Contour
milling
Milling
HSK5
Face mill‐ New con‐
ing tour
Pocket Path
Multi-edge Predrilling
spigot
Groove Pocket
Thread mill‐ Pocket
ing res. mat.
Engraving Spigot
Spigot
res. mat.
Contour <<
milling
HSK5 HSK6
Turning Miscellane‐
(only for G ous
code)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
Spigot res. --
mat.
<< >>
Miscellaneous
HSK6
Settings High
speed set‐
tings
Swivel Parallel
plane axes
Swivel tool Repeat
progr.
Counter‐ --
spindle
Transfor‐ --
mations
Subpro‐ --
gram
-- OEM
>> <<
HSK7
Simulation
SINUMERIK Integrate Run MyScreens (BE2)
OEM
<<
HSK10
Tool
Straight line
Circle center
point
Circle radius
Polar
Approach/re‐
tract
--
--
HSK8
NC select