Siemens SINUMERIK 840DE sl Commissioning Manual page 1075

5.8 Example 6: Progress bar
The progress bar is a special display type of the input/output field and is designed for display
without input.
Basically there are two progress bar types:
1. Progress bars with up to two color changes, e.g. for temperature or utilization display (see
example 6a)
2. Progress bars to display progress (no color change) in the Operate style (see example 6b)
Example 6a
Progress bar with two color changes:
Figure 5-1
DEF PROGGY0 = (R/0,150,50,100///DT1,DO0//"$R[10]"//,,150/3,4,,,,,,,9,7)
To use a progress bar with color change, the display mode DT (DisplayType) must be set to
1.
The orientation of the progress bar is determined via the attribute display option DO
(DisplayOption):
0: From left to right (default)
1: From right to left
2: From bottom to top
3: From top to bottom
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
Progress bar with two color changes
Variable type:
Limits / toggle field:
MIN:
MAX:
Signal value SVAL1:
Signal value SVAL2:
Attributes:
Display mode DT:
Display option DO:
System or user variable:
Position of input/output field:
Width:
Colors:
Foreground color:
Background color:
Signal color SC1:
Signal color SC2:
5.8 Example 6: Progress bar
REAL
0
150
50
100
1 (progress bar)
0 (from left to right (default))
$R[10]
150
3 (dark green)
4 (light gray)
9 (yellow)
7 (red)
Variables
89