Siemens SINUMERIK 840DE sl Commissioning Manual page 1212

Graphic and logic elements
7.5 SIEsGraphCustomWidget
Example
setView(-15, -15, 15, 15)
setFillColor("#A0A0A4")
addCircle(0, 0, 5)
KeepAspectRatio = TRUE
Figure 7-9
KeepAspectRatio = TRUE
Figure 7-10
SelectedContour – name of the currently selected contour
Syntax:
Description:
Parameter:
Note
In order to be able to execute operations on a contour, e.g. to add a graphic object, you must
first select this.
226
Aspect ratio from X to Y axis remain the same
Aspect ratio from X to Y axis distorted
ReturnValue = ReadCWProperty
WriteCWProperty
Reads or sets the selection of the actual contour.
GraphVarName
Return Value
Value
(GraphVarName, " SelectedContour ")
(GraphVarName, " SelectedContour ", Value)
Name of the display variable which contains a SlEs‐
GraphCustomWidget
Read value of the property (QString)
Value to be set (QString)
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1