Procedure
Proceed as follows to configure the SITOP software for use with the PCU base software:
1. Call the settings of the SITOP software, for example, by right-clicking the SITOP UPS
2. In the "General" tab, select "UPS" in the drop-down list at "Serial interface".
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
2.4 Configuring the SITOP UPS module for use with the PCU Base Software
icon in the Windows information area and then selecting "Configuration".
The "SITOP DC UPS Configuration" dialog box opens.
Configuring the system
65