Siemens SINUMERIK 840DE sl Commissioning Manual page 1230

Graphic and logic elements
7.5 SIEsGraphCustomWidget
Parameters:
Note
This function automatically refreshes the display.
moveCursorOnContourNext – position the cursor to the next graphic object of a contour
Syntax:
Description:
Parameters:
Note
This function automatically refreshes the display.
moveCursorOnContourBack – position the cursor to the previous graphic object of a contour
Syntax:
Description:
Parameters:
244
GraphVarName Name of the display variable which contains a SlEs‐
GraphCustomWidget
Return Value Error code (bool): TRUE = successful
ContourName Name of the contour (QString).
If a contour is not specified, then the call automatically
refers to the currently selected contour.
ReturnValue = CallCWMethod
ReturnValue = CallCWMethod
ContourName)
Starting from the actual cursor position within a contour, using this function you
can navigate the cursor to the next point object of a contour.
GraphVarName Name of the display variable which contains a SlEs‐
GraphCustomWidget
Return Value Error code (bool): TRUE = successful
ContourName Name of the contour (QString).
If a contour is not specified, then the call automatically
refers to the currently selected contour.
ReturnValue = CallCWMethod
ReturnValue = CallCWMethod
ContourName)
Starting from the actual cursor position within a contour, using this function you
can navigate the cursor to the previous point object of a contour.
GraphVarName Name of the display variable which contains a SlEs‐
GraphCustomWidget
Return Value Error code (bool): TRUE = successful
ContourName Name of the contour (QString).
If a contour is not specified, then the call automatically
refers to the currently selected contour.
(GraphVarName, " moveCursorOnContourNext ")
(GraphVarName, " moveCursorOnContourNext ",
(GraphVarName, " moveCursorOnContourBack ")
(GraphVarName, " moveCursorOnContourBack ",
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1