Siemens SINUMERIK 840DE sl Commissioning Manual page 1488

Configuring the system
2.4 Configuring the SITOP UPS module for use with the PCU Base Software
Procedure
Proceed as follows to change the delay time:
1. Call the settings of the SITOP software, for example, by right-clicking the SITOP UPS
icon in the information area and then selecting "Configuration".
2. In the "SITOP DC UPS Configuration" dialog box, enter the wait time in seconds as a
command line parameter in the "Floating operation" tab:
– Syntax:
– Example:
3. Confirm the setting with "Save".
68
<Path>\Shutdown.bat -<Time in seconds>
C:\Program Files
(x86)\Siemens\MotionControl\siemens\sinumerik\hmi\base\Shutdown.bat -180
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
PCU-Basesoftware (IM8)