Siemens SINUMERIK 840DE sl Commissioning Manual page 1021

END_PRESS
HS7=("2nd screen form")
PRESS(HS7)
LM("Screen form2")
END_PRESS
//END
Example
HS1 = ("new softkey menu")
HS2=("no function")
PRESS(HS1)
LS("Menu1")
END_PRESS
PRESS (HS2)
END_PRESS
Various configurations of the start softkeys
Various configurations of the start softkeys are merged. In this case, initially the name of the
file to be interpreted is read-out of easyscreen.ini. A search is made for files with the .com
extension in the following directories:
[System user directory] /proj
●
[System oem directory] /proj
●
[System add_on directory]/ proj
●
[System Siemens directory] /proj
●
The configurations included for the start softkeys are now merged to form a configuration, i.e.
the individual softkeys are compared. If there are two or more configurations for a softkey, the
higher order configuration is always transferred into the merge version.
Softkey menus or dialogs that are possibly included are ignored. If a softkey has a command
without file information, e.g. LM ("test"), as the required softkey menu or dialog is contained in
the same file, then the corresponding file name is supplemented in the internal merge version
so that in this case, no changes are required. The merge configuration contained is then
subsequently displayed.
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
3.3 Definition and functions for start softkeys
; End of PRESS method
; Horizontal SK 7 labeled "2nd screen form"
; PRESS method for horizontal SK 7
; Load screen form2 function, where screen form2
must be defined within the same file.
; End of PRESS method
; End identifier of entry block
;Load new softkey bar
; Empty PRESS method
Fundamentals
35