Siemens SINUMERIK 840DE sl Commissioning Manual page 1026

Fundamentals
3.5 Notes on the easyscreen.ini
The screen position can be defined as follows:
● The screen position can be specified in "Pixels in relation to 640x480".
Example:
//M(MyMask/"MyCaption"/"\\myhelp.png"/0,219,335,174)
● The screen position can be coupled to the resolution-dependent position of a form panel
from an Operate standard screen layout, e.g. "Form panel4" ("auxiliary functions") from the
screen layout "slmastandardscreenlayout.SlMaStandardScreenLayout" of the "Machine"
area
//M(MyMask/"MyCaption"/"\
\myhelp.png"/"slmastandardscreenlayout.SlMaStandardScreenLayout.FormPanel4")
It is therefore easy to superimpose standard forms from Operate or position Easyscreen
screens precisely at their position.
Example:
//M(Mask/"Mask"//"slstandardscreenlayout.SlStandardScreenLayout.LowerForm")
Any other screen layout can also be used.
● The screen position can be coupled to a self-defined, resolution-dependent definition of
form panels in the easyscreen.ini file.
Example:
//M(MyMask/"MyCaption"/"\\myhelp.png"/"MyPanel")
40
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1