Siemens SINUMERIK 840DE sl Commissioning Manual page 1229

Example
Figure 7-16
moveCursorOnContourBegin – position the cursor to the first graphic object of a contour
Syntax:
Description:
Parameters:
Note
This function automatically refreshes the display.
moveCursorOnContourEnd – position the cursor to the last graphic object of a contour
Syntax:
Description:
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
Example - setCursorOnContour
ReturnValue = CallCWMethod
")
gin
ReturnValue = CallCWMethod
ContourName)
Starting from the actual cursor position within a contour, using this function you
can navigate the cursor to the first point object of a contour.
GraphVarName
Return Value
ContourName
ReturnValue = CallCWMethod
ReturnValue = CallCWMethod
ContourName)
Starting from the actual cursor position within a contour, using this function you
can navigate the cursor to the last point object of a contour.
7.5 SIEsGraphCustomWidget
(GraphVarName, " moveCursorOnContourBe‐
(GraphVarName, " moveCursorOnContourBegin ",
Name of the display variable which contains a SlEs‐
GraphCustomWidget
Error code (bool): TRUE = successful
Name of the contour (QString).
If a contour is not specified, then the call automatically
refers to the currently selected contour.
(GraphVarName, " moveCursorOnContourEnd ")
(GraphVarName, " moveCursorOnContourEnd ",
Graphic and logic elements
243