Siemens SINUMERIK 840DE sl Commissioning Manual page 614

Technologies and cycles
21.8 Turning on milling machines
MD20360 $MC_TOOL_PARAMETER_DEF_MASK
Bit 17 = 0
Bit 18 = 1
MD21203 $MC_LIFTFAST_MODE_MASK
Bit 0 = 1
MD24030 $MC_FRAME_ACS_SET
= 1
MD35040 $MA_SPIND_ACTIVE_AFTER_RESET[ ] Reset behavior of the spindle
[Tool spindle] = 2
[Turning spindle] = 2
MD52001 $MCS_DISP_COORDINATE_SYSTEM_2
= 0
MD52200 $MCS_TECHNOLOGY
= 2
MD52201 $MCS_TECHNOLOGY_EXTENSION
= 1
MD52206 $MCS_AXIS_USAGE[ ]
[Tool spindle] = 1
[Turning spindle] = 3
MD52207 $MCS_AXIS_USAGE_ATTRIB[turning spindle]
Bit 8 = 1
MD52212 $MCS_FUNCTION_MASK_TECH
Bit 10 = 1
600
With CUTMOD for turning and grinding tools, the cutting edge for the calculation of the
compensation values is not configured in the machining plane.
With CUTMOD for turning and grinding tools, always use the active plane for turning and
grinding tools.
This bit activates the monitoring of the direction for LIFTFAST for thread turning.
SZS results from the WCS transformed with the $P_CYCFRAME
Do not stop tool spindle during jog → spindle is listed in the T,S,M screen
Do not stop turning spindle during jog → spindle is listed in the T,S,M
screen
Milling
Turning
Tool spindle
Turning spindle
Offer rotary axis for blank clamping
Align the turning tool via kinematics transformation
Definition of the tool parameters
Settings for fast lifting
SZS coordinate system setting
Definition of the displayed directions in the user
interface for turning operations (variable)
Technology
Extended technology
Meaning of the axes in the channel
Attributes of the axes
General function screen for all technologies
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)