Siemens SINUMERIK 840DE sl Commissioning Manual page 567

MD20144 $MC_TRAFO_MODE_MASK
Bit 0 = 1
MD20070 $MC_AXCONF_MACHAX_USED[4]
= 5
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C
[3] = WZ
[4] = YC
Data set for inclined axis:
MD24430 $MC_TRAFO_TYPE_5
= 1024
MD24432 $MC_TRAFO_AXES_IN_5[ ]
[0] = 5
[1] = 1
[2] = 2
MD24434 $MC_TRAFO_GEOAX_ASSIGN_TAB_5[ ]
[0] = 1
[1] = 5
[2] = 2
MD24436 $MC_TRAFO_INCLUDES_TOOL_5
= 0
MD24700 $MC_TRAANG_ANGLE_1
= 55
Data set for linking (TRACON) of end face machining on main spindle (TRANSMIT) and
inclined axis (TRAANG):
MD24440 $MC_TRAFO_TYPE_6
= 8192
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
TRAANG runs in the background (persistent) and is not shown on the user interface.
Channel axis YC = 5th machine axis.
1st channel axis XC
2nd channel axis ZC
3rd channel axis C
4th channel axis WZ
5th channel axis YC
Transformation 5: TRAANG
1st transformation axis = channel axis, YC
2nd transformation axis = channel axis, XC
3rd transformation axis = channel axis, ZC
1st axis = channel axis XC
2nd axis = channel axis YC
3rd axis = channel axis ZC
Tool handling with active transformation 5.
Angle between 1st and 2nd transformation axis. Data set for linking (TRACON) of end
face machining on main spindle (TRANSMIT) and inclined axis (TRAANG).
Type of transformation that is available as sixth in the channel.
Technologies and cycles
Name of channel axis in the channel.
Axis assignment for transformation 5.
Assignment of geometry axes to channel
axes for transformation 5.
21.5 Turning
553