Siemens SINUMERIK 840DE sl Commissioning Manual page 646

Technologies and cycles
21.10 Measuring cycles and measurement functions
r
b
n
①
Figure 21-18
General cycle setting data for correction using the correction tables when forming measurements with
rotating spindle.
SD54691 $SNS_MEA_T_PROBE_OFFSET
= 0
= 1
= 2
SD54689 $SNS_MEA_T_PROBE_MANUFACTURER
= 0
= 1
= 2
632
Effective radius of the tool
Arc distance = SD54692
Maximum number of probe contacts = SD54693
1st measuring point.
Single cutting edge measurement
No data, default value
Correction in the cycle. This is only effective if SD54689 $SNS_MEA_T_PROBE_MANUFAC‐
TURER>0.
Correction using user-defined correction table
No data, default value
TT130 (Heidenhain)
TS27R (Renishaw)
Activate the measuring result compen‐
sation
Activates pre-configured compensa‐
tion tables for several tool probe mod‐
els (customer-specific)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)