Siemens SINUMERIK 840DE sl Commissioning Manual page 642

Technologies and cycles
21.10 Measuring cycles and measurement functions
Bit 3 = 1
Bit 6 = 1
Bit 7 = 1
Bit 8 = 1
Bit 9 = 1
Bit 16 = 1
Bit 17 = 1
Bit 28 = 1
21.10.3.2 Measuring tools at the milling machines
Measuring feedrate for tool measurement in JOG and AUTOMATIC
SD55628 $SCS_MEA_TP_FEED_MEASURE
= 300
Note
Measuring feedrate for tool measuring
All measuring cycles use the value saved in SD54636 or SD54651 as the measuring feedrate
after the tool probe has been calibrated. A different measuring feedrate can be assigned for
each calibration field [n].
When calibrating the probe, either the measuring feedrate from
SD55628 SCS_MEA_TP_FEED_MEASURE is used, or the measuring feedrate can be
overwritten in the input screen when calibrating. To do this,
SD54762 $SNS_MEA_FUNCTION_MASK_TOOL bit 4 must be set to 1.
In the following setting data, index [k] stands for the number of the current data field (probe
number -1) of the probe.
SD54633 $SNS_MEA_TP_TYPE[k]
= 0
= 101
= 201
= 301
= 2
= 3
The following setting data is used to define in which axes and directions it is possible to calibrate
a tool probe.
SD54632 $SNS_MEA_T_PROBE_ALLOW_AX_DIR[k]
= 133
628
Selects the probe calibration data, enable
Selects ZO correction in the basis reference (SETFRAME), enable
Selects ZO correction in channel-specific basic frames, enable
Selects ZO correction in the global basic frame, enable
Selects ZO correction in adjustable frames, enable
Selects workpiece measurement with spindle reversal
Selects align workpiece probe in the switching direction
Selects adjust workpiece length, enable
Default value
Compatibility (measuring cycles: cube, turning surface shows probe, milling surface shows
disk)
Disk in XY, working plane G17
Disk in ZX, working plane G18
Disk in YZ, working plane G19
Probe
Cube
Default value
Calibrate measuring feedrate for tool
probe and measure tool with station‐
ary spindle.
Probe type, cube/disk
Axes and directions for "calibration"
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)