Siemens SINUMERIK 840DE sl Commissioning Manual page 535

Bit 3
MD52229 $MCS_ENABLE_QUICK_M_CODES
= 0
Bit 0
Bit 1
Bit 2
Bit 3
MD52230 $MCS_M_CODE_ALL_COOLANTS_OFF
= 9
MD52231 $MCS_M_CODE_COOLANT_1_ON
= 8
MD52232 $MCS_M_CODE_COOLANT_2_ON
= 7
MD52233 $MCS_M_CODE_COOLANT_1_AND_2_ON
= -1
MD52281 $MCS_TOOL_MCODE_FUNC_ON[ ]
= -1
[0]
[1]
[2]
[3]
MD52282 $MCS_TOOL_MCODE_FUNC_OFF[ ]
= -1
[0]
[1]
[2]
[3]
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
= 1 Tapping also possible without encoder
Constant cutting speed referred to the diameter of the centering
= 0 Constant cutting speed referred to the diameter of the tool
= 1 Constant cutting speed referred to the diameter of the centering
Coolant OFF (default value)
Coolant 1 ON
Coolant 2 ON
Coolants 1 and 2 ON
You define the M function to switch off the coolant that is output when the tool is changed.
You define the M function for coolant 1 that is output when the tool is changed.
You define the M function for coolant 2 that is output when the tool is changed.
You define the M function for coolant 1 and 2 that is output when the tool is changed.
M function is not output.
If both M commands of a function "= -1", the corresponding field is not displayed on the
interface.
M code for tool-specific function 1 ON
M code for tool-specific function 2 ON
M code for tool-specific function 3 ON
M code for tool-specific function 4 ON
M function is output.
If both M commands of a function "= -1", the corresponding field is displayed on the interface.
M code for tool-specific function 1 OFF
M code for tool-specific function 2 OFF
M code for tool-specific function 3 OFF
M code for tool-specific function 4 OFF
Technologies and cycles
Enable fast M commands
M code for all coolants Off
M code for coolant 1 On
M code for coolant 2 On
M code for both coolants On
M code for tool-specific function ON
M code for tool-specific function OFF
21.4 Milling
521