Technical Data - Otto Bock DynamicArm 12K100N Instructions For Use Manual

Disengaging the electronic lock and fixing the DynamicArm in another position
Pull on the Linear Transducer until the previously set position is reached and overcome. Disengaging of the
electronic lock will be signalled by the corresponding noise. The DynamicArm can be brought to another po-
sition and fixed.
12.9 Program 9
For patients with one muscle signal. Without Electric Wrist Rotator. No switching required.
Control
Control type
Control of the DynamicArm
The DynamicArm is controlled with the Linear Transducer. To flex the DynamicArm, pull on the Linear Trans-
ducer. To extend the DynamicArm, release the Linear Transducer.
Fixing the DynamicArm in any position
Pull on the Linear Transducer to bring the DynamicArm in the desired position and hold in this position until the
engaging noise of the electronic lock can be heard. The DynamicArm will remain fixed in this position and the
amputee can release the Linear Transducer.
Disengaging the electronic lock and fixing the DynamicArm in another position
Pull on the Linear Transducer up to the previously set position and further. Disengaging of the electronic lock
will be signalled by the corresponding noise. The DynamicArm can be brought to another position and fixed.
13 Compatibility Survey
The mentioned System Electric Hands and System Electric Greifers can be combined with the DynamicArm.
Please pay special attention to the software version of the electronic control. The MyoSelect can be used to
determine which version you have.
INFORMATION
The Ottobock System Electric Hand 8E38=5, 8E39=5 and 8E41=5 "SensorHand" cannot be combined with
the DynamicArm!
Product
System E-Hand DMC plus
System E-Hand Digital Twin
System E-Hand DMC plus, size 7
System E-Hand Digital Twin, size 7
System E-Hand SensorHand Speed
MyoHand VariPlus Speed
System E-Greifer DMC plus
System E-Greifer Digital Twin
System E-Greifer DMC VariPlus

14 Technical Data

Power supply
Charging temperature:
Weight (dependent on forearm length)
58 | Ottobock
SensorHand Speed, System
DynamicArm
Electric Greifer DMC VariPlus
Control with Linear
One electrode
Transducer
Position control VarioControl
Sales article
number
8E38=6
8E38=7
8E38=6
8E38=7
8E38=8
8E38=9
8E33=6
8E33=7
8E33=9
Li-Ion battery
> 0 °C
approx. 1000 g
System Electric Hand and System
Electric Greifer
One electrode
Digital Twin without function plug
Compatible software version of
the electronic control
From version 1.3
From version 1.3
From version 1.0
From version 1.0
From version 1.0
From version 1.0
From version 1.2
From version 1.4
From version 1.0
DynamicArm