Otto Bock DynamicArm 12K100N Instructions For Use Manual page 46

46 | Ottobock
25
Wiring without Electric Wrist Rotator 10S17
(not recommended!)
NOTICE
Damage due to short circuiting. The coaxial plug
must only be used for connection of the battery and
electrodes. Connection of other components can lead
to short circuiting. The two-pole motor cable must not
be attached to the coaxial plug!
One of the two three-pole connectors has a colour
dot on it (arrow). These two connectors must not be
interchanged!
26
Screw in the plastic screw to secure the two connectors.
Insert the coaxial plug and turn it until you feel it lock
in place.
Insert the lock ring into the groove of the lamination
ring using tweezers to fix the coaxial plug.
Next, mount the coaxial plug in the lamination ring. See
Fig. 24 and Fig. 25.
27
DynamicArm