Editing Sequence Steps - Agilent Technologies 16712A Help Manual

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Trigger Tab
• Replace
Replaces the currently selected level with the currently highlighted trigger
function.
• Delete
Deletes the level that is currently selected.
• Insert Before / Insert After
Inserts an additional step before or after the selected step.
• Trigger Level (State only)
Makes the current step the trigger level.
• Default (State only)
Only appears in the menu for the last step in a state trigger sequence. The
last state always stores to fill memory. Default returns the state to Store
anystate.

Editing Sequence Steps

You can modify the contents of a step in the trigger sequence by
editing it.
To Edit a Sequence Step:
1. Select the sequence level number button and choose Edit....
2. Select a term name to choose a different term.
You can also choose negations of terms and combinations of terms.
3. Set the values of the other fields, such as durations and occurrence counts.
4. Select the Close button to close the sequence step editing dialog.
To set the value of a term used in a sequence step, see "Defining
Resource Terms" on page 92.
If you are editing a user-level function, refer to:
"Setting Pattern Durations and Occurrence Counts" on page 91 (Timing
78
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com