Testing The Logic Analyzer Hardware - Agilent Technologies 16712A Help Manual

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer

Testing the Logic Analyzer Hardware

Testing the Logic Analyzer Hardware
In order to verify that the logic analyzer hardware is operational, run
the Self Test utility. The Self Test function of the logic analysis system
performs functional tests on both the system and any installed
modules.
1. Disconnect all probes of the logic analyzer module.
2. If you have any work in progress, save it to a configuration file. (see the
Agilent Technologies 16700A/B-Series Logic Analysis System help
volume)
3. Disconnect all loads, adapters, or preprocessors from the probe cable
ends.
4. From the system window, select the System Administration button.
5. Select the Admin tab, then select the Self Test... button.
6. Select Master Frame.
7. Select the logic analyzer that you want to test.
8. In the Self Test dialog box, select Test All.
to do something must be run this way.
If any test fails, contact your local Agilent Technologies Sales Office or
Service Center for assistance.
See Also Self Test (see the Agilent Technologies 16700A/B-Series Logic Analysis
System help volume)
Agilent Technologies 16712A 128K Sample Service Guide
40
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The system closes all windows before starting up Self Test.
If the module is in an expansion frame, select Expansion Frame.
You can also run individual tests by selecting them. Tests that require you