Agilent Technologies 16712A Help Manual page 87

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Trigger Tab
trigger function uses one internal sequence level.
See Also
"Working with the User-level Function" on page 89 for more information on
the user-defined mode.
Basic State Trigger Functions
The following basic trigger functions are found in Trigger Functions
when the analyzer is in state mode. Each macro uses one internal
sequence level.
• Find Pattern n times.
This function becomes true when it sees a pattern you have designated
occurring a designated number of times. The pattern may occur
consecutively, but does not have to. It uses one internal sequence level.
• Find anystate n times.
This function becomes true with the nth state it sees. It uses one internal
sequence level. It is equivalent to Wait n external clock states.
• Find pattern2 occurring immediately after pattern1.
This function becomes true when the first pattern you have designated is
seen immediately followed by a second designated pattern. It uses two
internal sequence levels.
• Find pattern n consecutive times.
This function becomes true when it sees a pattern you have designated
occurring a designated number of consecutive times. It uses one internal
sequence level.
Sequence-Dependent Trigger Functions
The following trigger functions are found in Trigger Functions when
the analyzer is in state mode. These functions each trigger on a
particular sequence of events.
86
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com