Clearing Part Or All Of The Trigger; Overview Of The Trigger Sequence - Agilent Technologies 16712A Help Manual

If one of the settings in the recalled trigger sequence conflicts with the
acquisition mode, it will be set to the closest setting for that mode.

Clearing Part or All of the Trigger

To Clear Part or All of the Trigger:
1. Select the Trigger tab.
2. Select Clear from the menu bar.
3. Choose the option you want from the choices described below:
• All
Clears sequence steps, resource terms, resource term names, and
trigger position back to their default values. Turns on Count Time.
• Sequence Levels
Resets the trigger sequence to the default sequence for the analyzer
acquisition mode.
• Resource Terms
Resets all resource term assignment fields, including labels and values,
back to their default values. The default is usually for all terms to be on
the first label, with value XXXX.
• Resource Term Names
Resets all the resource term names to their default values, Pattern1
through Pattern9 and Patt10.
• Save/Recall Memories
Deletes all saved trigger sequence specifications.

Overview of the Trigger Sequence

The trigger sequence is a sequence of steps that control the path that
the analyzer takes to find the trigger event. The path taken resembles a
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Trigger Tab
81