Agilent Technologies 16712A Help Manual page 95

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Trigger Tab
used in a negated form.
To Define a Pattern Term
1. Select the label name button to the right of the term name and choose the
label that you want to use.
2. If necessary, add more labels (see page 98) to the term.
3. Select the term value field, to the right of the label name.
4. Enter the pattern for each label.
Depending on the base setting, such as hex or octal, some characters will
not be accepted. Don't cares are indicated by an X.
Right-click on any of the bit pattern value fields to quickly assign the
pattern term to a preset value. Clear (=X) sets the value to all X (don't
cares). Set (=1) sets the value to all 1s. Reset (=0) sets the value to all
0s.
Using Range Terms
Range terms bracket groups of data values between upper and lower
boundaries that you assign. The range term becomes true when the
data is numerically between or on the two specified boundaries.
The labels used by a range must be contained in a single pod pair, with
no clock channels or re-ordered bits allowed.
To Define a Range Term
1. Select the label name button to the right of the term name and choose the
label that you want to use.
Only one label can be used at a time for range terms.
2. Select the lower value field, to the right of the label name.
3. Enter the pattern for the low value of the range.
4. Select the upper value field, to the right of the label name.
94
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com