Agilent Technologies 16712A Help Manual page 53

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Sampling Tab
When the trigger position is set to User Defined, a trigger position slider
appears. Use this slider to set the trigger position any where between 0%
and 100%. As the slider is adjusted, the % Post Store indicator shows the
amount of data that will be stored after the trigger point.
• Delay
This option delays the start of data storage until some time after the
trigger. The range of the delay time is affected by the sample period, but it
could range between 16 ns to 8 ks.
52
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com