Making A Basic Timing Measurement - Agilent Technologies 16712A Help Manual

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer

Making a Basic Timing Measurement

Making a Basic Timing Measurement

This example uses the circuit board that is supplied with the Making
Basic Measurements kit as the target system. The kit is supplied with
every logic analysis system, or can be ordered from your Agilent
Technologies Sales Office.
There are six major steps to making a basic measurement.
Connect the Logic 1. Connect probes.
Analyzer to the Target
• Connect Pod 1 of the logic analyzer to J1 on the target system.
System
The training board has terminations and headers already built in to the
system, so you can connect the logic analyzer pod directly to the board.
2. Define the type of measurement. On the Agilent Technologies 16700A/B
logic analysis system, open a logic analyzer setup window.
a. In the main window, select the logic analyzer icon.
b. Choose Setup... from the menu.
c. Select the Sampling tab.
d. If the logic analyzer is not already set for Timing, change the type to
3. Group and label bits.
a. Select the Format tab.
b. Optional - Insert a second label.
c. Optional - Rename Label1
22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Timing.
1. Select the Label1 button.
2. Choose Insert after....
3. In the Enter Label Name box, select the OK button.
1. Select the Label1 button.