Agilent Technologies 16712A Help Manual page 20

1. Select the Label1 button.
2. Choose Insert after....
3. In the Enter Label Name box, select the OK button.
c. Optional - Rename Label1.
1. Select the Label1 button.
2. Choose Rename....
3. Enter a new name in the name field.
4. Select the OK button to close the Rename Label box.
d. Select the bit assignment button.
The bit assignment button is to the right of a label name, and under a
pod column.
e. Choose ........******** from the menu.
If none of the choices match your own system, choose Individual...
and select the individual bits to assign them (*) or ignore them (.).
5. Define trigger events for patterns on buses.
a. Select the Pattern subtab in the Trigger tab.
b. Optional - Rename Pattern1.
1. Select the Pattern1 field.
2. Enter a new name.
c. Select the appropriate label.
1. Select the label name button.
2. To define the event as a combination of labels, choose Insert... To
3. In the dialog box, select the label name you want to use and then
d. Select the field with XX and enter the value you want to trigger on.
e. Optional - Repeat steps a - d for Pattern2.
6. Optional - Add additional trigger events to the trigger specification.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
use a different label to define the event, choose Replace...
select the OK button.
Making a Basic State Measurement
19