Agilent Technologies 16712A Help Manual page 94

edge terms.
When the module is set up as two analyzers, each resource term can
be used by either of the two analyzers, but not both at the same time.
To Define a Resource Term
1. In the Trigger tab, select the appropriate subtab to bring the group of
terms forward.
2. Optional - Highlight the term name and enter a new name.
For Timer terms, set the time value and skip the remaining steps.
3. Optional - Select the label button to the right of the term name and choose
Replace.
4. Select the label that you want to use.
5. Optional - add more labels (see page 98) to the term.
6. Optional - Set the numeric base.
7. Select the term value field, to the right of the label name.
8. For pattern and range terms, enter the term value. For edge terms, assign
edges or glitches to appropriate bits.
See Also
"Using Bit Pattern Terms" on page 93
"Using Edge Terms" on page 95
"Using Range Terms" on page 94
"Using Combinations of Terms" on page 97
"Using Timer Terms" on page 96
"Adding and Deleting Labels for Terms" on page 98
"Numeric Base" on page 98
Using Bit Pattern Terms
Bit pattern resource terms can be set to match a numeric value or bit
pattern on a group of data channels such as a bus. In order for a pattern
to be found by the analyzer, the input data must match all bits of the
pattern that are not defined as Don't Cares (X). Patterns can also be
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Trigger Tab
93