Run The Measurement - Agilent Technologies 16712A Help Manual

Define Terms
Trigger terms are like variables that you use in the trigger sequence.
Depending on what analyzer you are using, you can either assign the
values directly from within the trigger sequence or from the tabs
(pattern, range, edge).
Step 4: Run the Measurement (see page 15)
See Also
"Defining Resource Terms" on page 92
"Understanding Logic Analyzer Triggering" on page 74
"Setting Up a Trigger" on page 76
"The Trigger Tab" on page 73
Measurement Examples (see the Measurement Examples help volume)

Run the Measurement

You run the measurement by selecting the Run button. The Run button
is labeled either Run, Group Run, or Run All. The difference between
the three types is that Run starts only the instrument you are using,
Group Run starts all instruments attached to group run in the
Intermodule window, and Run All starts all instruments currently
placed in the workspace.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
Setting Up a Measurement
15