Coordinating Measurements - Agilent Technologies 16712A Help Manual

Coordinating Measurements

When you want to coordinate the triggering of two measurements
happening on the same logic analyzer, you need to use arming control.
The two measurement machines are by default controlled by the same
run button. However, you can set machine 1 to arm machine 2, or the
other way around.
If the timing measurement and state measurement are being handled
by two different instruments, you can coordinate them by connecting
both instruments to the same display, and then setting the correlation
in the correlation dialog that appears.
You can tell which instrument is controlling a measurement by looking
at the instrument icon. The letter on the icon represents the slot of the
frame that the instrument is in. Icons with the same letter are
controlled by the same instrument.
See Also Overview - Multiple Instrument Configuration (see the Agilent
Technologies 16700A/B-Series Logic Analysis System help volume)
Overview - Multiple Machine Configuration (see the Agilent Technologies
16700A/B-Series Logic Analysis System help volume)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer

Coordinating Measurements

31