Table of Contents
Advertisement
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
Making a Basic Timing Measurement
d. Select the edge assignment button (........) and enter the edge or
6. Add the edge event to the trigger specification.
a. Select the sequence level number 1 button and choose Edit...
b. In the dialog box, select the Pattern1 button and choose Combo...
c. In the Combination box, select the Off option button next to Edge1 and
d. Select the Or option button where the path from Pattern1 and the
e. Select the OK button.
Trigger on Pattern1.Edge1 occurs 1 times
The logic analyzer automatically triggers on the first trigger event. You can
set up more complex triggers by editing the sequence levels and defining
additional trigger events.
See Also
1. Select the Run button.
2. Examine the data.
a. Select the Window menu.
24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1. Select the label name button.
2. To define the event as a combination of labels, choose Insert... To
use a different label to define the event, choose Replace... Edges
within an event are always OR'd together, which means only one of
the edges on one of the labels needs to occur for the edge event to
become true.
3. In the dialog box, select the label name you want to use and then
select the OK button.
edges you want to trigger on. Remember, if more than one edge is
specified, then when the logic analyzer detects any of the edges the
event becomes true.
choose On.
path from Edge1 come together, and choose And.
The analyzer is now set to trigger when it detects Edge1 and Pattern1
on the bus. The trigger sequence window shows
.
"The Trigger Tab" on page 73
Advertisement
Chapters
Table of Contents
