Inserting And Deleting Sequence Steps - Agilent Technologies 16712A Help Manual

functions match choose User level at the end of the list.
For a picture corresponding to the trigger function, select the function
from the list. The area to the right shows a picture of the function's
effect. The function itself is not inserted into the trigger sequence
unless you select the Replace or Insert button.
See Also "Trigger Functions" on page 82

Inserting and Deleting Sequence Steps

NOTE:
For state measurements, the last level of the trigger sequence is always a
Store level. It cannot be deleted. For timing measurements, the last level
must contain the TRIGGER action.
To Insert Sequence Steps
1. Select the sequence level that you want to insert other steps around.
2. Select a trigger function from the list in the Trigger Functions tab.
3. Choose the Insert Before or Insert After button.
To Delete Sequence Steps
1. Select the sequence step that you want to delete.
2. Select the Delete button.
Trigger Sequence
When you select a sequence level, you see a selection menu with
Editing Options
choices that allow you to modify the sequence. Choose the option you
want from the choices below.
• Edit
Changes the contents of the sequence step. You can change the resource
terms or other assignment fields, such as durations and occurrences.
• Copy
Copies the currently selected step. When you copy a level, the new level
contains the same function as the original.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Trigger Tab
77