Bell Time; Bell Time Delay; Entry Time; Exit Time - Pyronix Matrix Series Installation Manual

Matrix 832 / 832+ / 424
SU PPLY FA U L T A RMED A L A R M FIRE
8
R EAD Y P.A.
D A Y T A MPE R
1 2 3 4
P .A. A B C D SET
FIR E 5 6 7 8
FUN C
9 0
Keypad Programming Procedure

7.13.1 Bell Time

BW
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]...[99] (in minutes or seconds). To save the changes press
B
. An acceptance tone will be played.

7.13.2 Bell Time Delay

BW
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]...[99] (in minutes). To save the changes press
acceptance tone will be played.

7.13.3 Entry Time

BW T
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]...[99] (in seconds). To save the changes press
acceptance tone will be played.

7.13.4 Exit Time

BW U
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]...[99] (in seconds). To save the changes press
acceptance tone will be played.

7.13.5 Final Exit Delay

BW V
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]...[99] (in seconds). To save the changes press
acceptance tone will be played.
7.13.6 Auto-Arm Commencing Time – Every Day
BW W
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter four digits [0000]*...[2359] for the time the partition will arm every day.
An acceptance tone will be played.
[0000]* = Auto-Arm time disabled

7.13.7 Inactivity Auto-Arm

BW X
Enter followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]*...[99]* (multiple per 10 min). To save the changes press
B
. An acceptance tone will be played.
[00]* = auto-arm disabled
[99]* = auto-arm at 990 minutes non activity registered
7.13.8 AC Fail Warning & Report Delay
BW Y.
Enter The current time is displayed. To change the time, enter two digits [00 - 99] (in minutes). To
save the changes, press
7.13.9 Telephone Line Fail Warning & Report Delay
BW Z.
Enter The current time is displayed. To change the time, enter two digits [00 - 99] (in minutes). To
save the changes, press

7.13.10 Seconds in Last Minute of the Day

BW [.
Enter The current time is displayed. To change the time, enter two digits [00 - 99] (in seconds). To
save the changes, press
Page 70
B
. An acceptance tone will be played.
B
. An acceptance tone will be played.
B
. An acceptance
tone will be played.
B
. An
B
. An
B
. An
B
. An
RINS428-5