Icon Keypad Programming; Lcd Keypad Programming - Pyronix Matrix Series Installation Manual

!
SU PPLY FA U L T A RMED A L A R M FIRE
8
R EAD Y P.A.
D A Y T A MPE R
1 2 3 4
P .A. A B C D SET
FIR E 5 6 7 8
FUN C
9 0
Keypad Programming Procedure

7.9.1 Icon Keypad Programming

7.9.1.3 Icon Keypad Partition Allocation
BUW
Enter followed by one digit to choose keypad ID number from [1 - 4]. The current setting will be
displayed. Press [1 - 4] to assign a partition to the keypad. To save the changes press
tone will be played.
The option will repeat from the beginning.
BB
Press to exit the programming.
7.9.1.4 Icon Keypad Private / Public Mode
BUW
followed by one digit for the desired keypad ID number [1 - 4]. To select an option use the
?
buttons. To change an option, press the
will be played.
Option Option Off = Alarm Icon Off
1 Keypad Public enabled

7.9.2 LCD Keypad Programming

7.9.2.1 LCD Keypad Partition Allocation
BUWT
Enter followed by one digit to select the keypad ID number from [1 - 4]. The current keypad
partition allocation will be shown. Press [1 - 4] to assign partitions to the keypad. To save the changes press
B
. An acceptance tone will be played.
The function will repeat from the beginning. Press
7.9.2.2 LCD Keypad Private / Public Mode
BUWU
Enter followed by one digit for the desired keypad ID number [1 - 4]. To select an option use the
> ?
and buttons. To change an option, press the
tone will be played.
Option Option Off = Alarm Icon Off
1 Keypad Public enabled
function
option
The display shows the indications that are shown on entering private/ public mode.
RINS428-5
C
353
1 off
MATRIX
button. To save the changes press
Option On = Alarm Icon On
Keypad Private enabled
BB
to exit the programming.
C
button. To save the changes press
Option On = Alarm Icon On
Keypad Private enabled
Matrix 832 / 832+ / 424
B
. An acceptance
>
and
B
. An acceptance tone
Default
Off
B
. An acceptance
Default
Off
Page 55