First To Alarm Mode; Engineer Mode; User Mode - Pyronix Matrix Series Installation Manual

Matrix 832 / 832+ / 424

5.7 First to Alarm Mode

When the system is in alarm mode it resets either automatically or by entering a valid user code. When the
system is reset entering the user code the first zone to alarm will be displayed on the display. One further
user code entry will clear the FTA and reset the panel to disarmed mode.

5.8 Engineer Mode

Engineer Mode gives total access to the programming facilities of the system to the engineer using the
engineer code.

5.9 User Mode

User mode allows arming / disarming of the panel and access to the user menu (See the user guide for user
programming instructions).
Page 20 RINS428-5