Decibell Connection To Matrix 832; Decibell Connection To Matrix 424 - Pyronix Matrix Series Installation Manual

Matrix 832 / 832+ / 424

12.12.4 Decibell Connection to Matrix 832

17V~ +BAT- B+ B- BT GT

12.12.5 Decibell Connection to Matrix 424

+B ELL-
-
+
BAT
17 V AC
Output
Page 152
Relay
NC C KD
Bell Fuse 1Amp
KD Z1 Z2 +AUX- Z3
NVM Rese t
Z1 Z2 Z3 Z4 +AUX-
IMPORTANT
The Decibell may be connected / programmed
using different programmable outputs.
In this instance PGM1 is programmed as
"Externa Bell", and PGM2 is programmed as
"Strobe" - See section 8.11
DECIBELL
Z4
IMPORTANT
The Decibell may be connected / programmed using
different programmable outputs.
The Bell Tamper must be connected to a spare zone
programmed as 'Tamper' - in this case Z1
In this instance PGM1 is programmed as "External Bell"
and PGM2 is programmed as "Strobe" - See section 8.11
PGM1 = BA = BELL OUTPUT
DECIBELL
PGM2 = STB = STROBE TRIGGER
Z5 Z6 Z7 Z8
PGM1 = BA = BELL OUTPUT
PGM1 = STB = STROBE TRIGGER
RINS428-5