Pyronix Matrix Series Installation Manual page 52

Matrix 832 / 832+ / 424
The attributes for Arm B will now be displayed
To select an option use the
B
changes press
Option Option Off = Alarm LED Off
1 Chime Disabled
2 Test Disabled
3 Mask Disabled
4 Double Knock Disabled
5 Normally closed
The attributes for Arm C will now be displayed
To select an option use the
B
changes press
Option Option Off = Alarm LED Off
1 Chime Disabled
2 Test Disabled
3 Mask Disabled
4 Double Knock Disabled
5 Normally Open
The attributes for Arm D will now be displayed
To select an option use the
B
changes press
Option Option Off = Alarm LED Off
1 Chime Disabled
2 Test Disabled
3 Mask Disabled
4 Double Knock Disabled
5 Normally Open
The partition number allocated to this zone will then be displayed
Enter a partition number [1], [2], [3] or [4] to allocate the zone to. Press
allocation. An acceptance tone will be played.
The procedure will now return to the beginning to program the next zone. Repeat the above procedure for
each zone to be programmed.
BB
Press to exit this function.
Page 46
> ?
and buttons. To change an option press the
. An acceptance tone will be played.
> ?
and buttons. To change an option press the
. An acceptance tone will be played.
> ?
and
. An acceptance tone will be played.
Option On = Alarm LED On
Chime Enabled
Test Enabled
Mask Enabled
Double Knock Enabled
Normally Open
Option On = Alarm LED On
Chime Enabled
Test Enabled
Mask Enabled
Double Knock Enabled
Normally Closed
buttons. To change an option press
Option On = Alarm LED On
Chime Enabled
Test Enabled
Mask Enabled
Double Knock Enabled
Normally Closed
C
button. To save the
Default
Off
Off
Off
Off
Off
C
button. To save the
Default
Off
Off
Off
Off
Off
C
button. To save the
Default
Off
Off
Off
Off
Off
B
to save the partition
RINS428-5