Entering The Engineer Menu (Default Engineer Code = 9999); Exiting The Engineer Menu; Accessing The Engineers Menu On Any External Wired Keypad; Saving The Programming - Pyronix Enforcer 32-WE Programming Reference Manual

4.2 Entering The Engineer Menu (Default Engineer Code = 9999)

Access to the Engineer Menu maybe denied if:
1) One or more areas are currently armed.
2) The Master User has disabled the function "Allow Engineer Menu" in the Master Manager Menu. If
this is the case 'Authorisation required' will be shown on the display.
When in Engineer Menu, the fault (=) LED will flash and high pitch tone will be generated regularly.

4.3 Exiting The Engineer Menu

On completion of programming, the system can be returned back to disarmed mode by either
scrolling to the 'Exit Engineer Menu' option or press a from any main menu option (represented in
capital letters).

4.4 Accessing the Engineers Menu on any external wired keypad

It is possible to access the Engineer Menu on any keypad that is part of the system. Whichever
keypad that is being used, all other keypads will display 'System Busy'. To access the Engineer menu
on one of these keypads press b.

4.5 Saving The Programming

Any programming done in the engineer or user mode will not be saved on the system until the
Engineer or User menu have been exited.

5. Engineer Menu

Please refer to the Engineer Programming Quick Guide for this chapter. The meaning of every option
presented in the quick programming guide is explained here in detail.

5.1 Date and Time?

All log entries and the system display include the date and time so it is vital that the correct date and
time is programmed. This may be also programmed in the Master Manager Mode.
NOTE: Please note that powering down the system and removing the battery will reset the time and
date information.
5.1.1 Change Year
For the year 2011, enter 11.
5.1.2 Change Month
For March, enter 03.
5.1.3 Change Day
For 31st, enter 31.
5.1.4 Change Hours
Use 24 hour clock format. For 8pm enter 20:00.
5.1.5 Change Minutes
For 7:30, enter 30.
5.1.6 Summer Time Adjust
If activated this option will automatically change 1 hour ahead and backward for the summer and
winter time.
Page: 6