Walk Test; Siren Test; Dial Out Menu; Allow Engineer Menu - Pyronix RINS1902-2 User Manual

Enter the mobile number. Press I.
Press [ or ] to enable or disable
the number. Press I.

14.11 Walk Test

The 'Walk Test' function allows the testing of all programmed inputs on the wireless alarm
system.
Press b or A to scroll to 'WALK
I
TEST'. Press
.
Select which level set to walk test.
Press I to walk test all inputs or
press the A to walk test an input
individually.
Walk Test Inputs
Walk test the mentioned inputs on the
display. After all inputs have been
walk test successfully 'walk test
completed' will be displayed.
Walk Test Individual Inputs
Press [ or ] to scroll through the
different inputs and press I to walk
test that input.

14.12 Siren Test

This function is used to test the siren and strobe outputs.
Press b or A to scroll to 'SIREN
I
TEST'. Press
.
This tests both the siren and strobe
I
outputs. Press

14.13 Dial Out Menu

This function is used to force the panel to dial out to UDL software.
Do not use this function unless you have been instructed to by your Engineer.

14.14 Allow Engineer Menu

If this function is enabled, the engineer will require authorisation from you before they can
access the engineering menu.
Press the b or A keys to scroll to
'ALLOW ENGINEER MENU'. Press
Wireless Alarm System: User Manual
.
I
.
Mobile No. _
WALK TEST?
Walk Test Areas
Walk Test
Input 01
Walk Test Input
SIREN TEST?
Testing Siren...
ALLOW ENGR MENU?
24
[ABCD]
[01]