Siren Test
This function is used to test the siren and strobe outputs.
Press b or h to scroll to 'SIREN TEST'. Press f.
This tests both the siren and strobe outputs. Press f
to end the test.
Dial Out Menu
This function is used to force the panel to dial out to UDL software.
Do not use this function unless you have been instructed to by your engineer.
Allow Engineer Menu
If this function is set to 'No', the engineer will require authorisation from you (by changing it back to
'Yes' before they can access the engineer menu).
Press the b or h keys to scroll to 'ALLOW
ENGINEER MENU'. Press f.
Press b or d to select either 'Yes' or 'No'. Press
f.
Block UDL Set
Your alarm installation company may have configured your alarm system so it can remotely be set/
unset via UDL software. Should you wish to block this access, you can enable this function.
Press the b or h keys to scroll to 'BLOCK UDL
SET'. Press f.
Press b or d to select either 'Yes' or 'No'. Press
f.
24
EURO 46 V10 User Manual
SIREN TEST?
Testing Siren...
ALLOW ENGR MENU?
Allow Engr Menu?
Yes
[1]
BLOCK UDL
SET?
Block UDL Set
No
[0]