Dial Out Menu; Allow Engineer Menu; Block Remote Set - Pyronix Enforcer 32-W User Manual

13.11 Dial Out Menu

The control panel may be dialled into, and programming information kept on a PC using the
InSite UDL software. This function allows the control panel to dial a Pre-programmed PC
telephone number (programmed by your engineer) to directly dial to a PC. This is usually used
when your engineer requests it.
Press b or A keys to scroll to 'DIAL
OUT MENU'. Press I.
Press [ or ] to scroll through the
different PC numbers, press I to dial
that number
Press [ or ] to select the operation
that needs to be performed. Press I.
The control panel will dial the
programmed PC. If this fails please
contact your engineer.
Press A.

13.12 Allow Engineer Menu

If this function is enabled, the engineer will require authorisation from you before they can
access the engineering menu.
Press the b or A keys to scroll to 'ALLOW
ENGINEER MENU'. Press I .
Press [ or ] to select either 'Yes' or
'No'. Press I.

13.13 Block Remote Set

Your wireless alarm system may be configured so that your alarm installation company can
remotely set/unset. Should you wish to block this access, you can enable this function
Press the b or A keys to scroll to
'BLOCK REMOTE SET'. Press I.
Press [ or ] to select either 'Yes' or
'No'. Press I.
User Manual
Page: 22