Xerox Phaser 3330 Service Manual page 109

Troubleshooting
Step Actions and Questions
3. Enter dC330 Component
08-500 to check if the Registration Sensor
(08-130) is connected and working. If
necessary, install a new sensor (PL 3.1A.20,
Parts List 3.1A Frame (2 of
Does the error persist?
4. Clean the Registration Roller using a slightly
damp (water only) lint free cloth. Install a
new Registration Roller if it is damaged, (PL
3.1A.16, Parts List 3.1A Frame (2 of
Does the error persist?
5. Enter dC330 Component
04-100 to check the Main Drive Motor.
The motor runs?
6. All gears in the Main drive Assembly rotate
when the Main Drive Motor runs?
7. Does the error persist?
2-50 Phaser 3330 and WorkCentre 3335/3345
Service Manual
Yes
Control, code Go to step 4.
2)).
Go to step 5..
2)).
Control, code Go to step 6.
Go to step 7.
Install a new Main PWB:
• Phaser 3330 (PL
• WorkCentre 3335 and
1.0.7, Parts List 1.0
Phaser 3330 Main)
3345 (PL 6.1.7, Parts
List 6.1 WorkCentre
3335/3345 Main).
No
Complete.
Complete.
Install a new BLDC
Motor, (PL 3.5.1, Parts
List 3.5 Drive).
Go to step 6.
Install a new Main Drive
Assembly, (PL 3.5.18,
Parts List 3.5 Drive).
Go to step 7.
Complete.
Xerox Internal Use Only