Deleting Horizontal Alignment Data; Designing Vertical Curves - Horizon Fitness HTS-580 Series Operation Manual

7.6.4 Deleting horizontal alignment data

The horizontal alignment data in the internal memory can be deleted with the
procedure as follows:
Operation procedure
Press F2 (road measurement) in
the menu of Measurement
Program and choose a file.
Press F3 (DEL HZ AL DATA)
Press F4 (Yes), the current
selected horizontal alignment
data will be deleted.
7.6.5 DESIGN: VERTICAL CURVE
A vertical curve consists of series of intersection points. The intersection point
consists of a chainage, elevation and curve length. The start and end intersection
points must be a zero curve length.
98
Operation
F2
Select a file
ENT
F3
Display