Volume Calculation - Horizon Fitness HTS-580 Series Operation Manual

7.9 Volume Calculation

Operation procedure
① Press F1 key from measure
program on page （3 / 3） to select
a measure file and enter the
interface of selecting calculating
point.
②All points can be selected by
pressing F2 key, points can be
selected by inputing the starting
points NO.and the end point No.
You may press up and down key
and then ent key to select a single
point(if the current point was
selected, deselect the point),then
press F1 key to the next step.
③Input the base level height and
then Press ent key to calculate
the volume
Note：the plus volume means the volume above the base plane , theminusvolume
means volume below the base plane,and the total volume means the sum of the
plus and minus volume.
operation
F1
F1
ENT
dispaly
115