Horizon Fitness HTS-580 Series Operation Manual page 96

Explanation:
1. The data in the first row is the initial point data, and only one point can be
entered.
2. The data in the second, third, fourth rows is element data, any combination can be
input according to the requirements.
3. The data in the fifth, sixth, and seventh rows is auxiliary calculation data,
choosing whether to enter or not according to the requirements as an option, the
default step length is 20m. Only one staking space is available.
4. The transition curve parameter A and circular curve radius R as needed (sign as
per the direction of route, curve to left is negative, and curve to right is positive), all
other parameters are positive.
5. When the radius of circular curve is ∞, the input radius is 0.
Convert the designed alignment data into *.HAL file using transmission software,
then copy the data to SD card or the memory.
For example：
start 0,2541930.604,502841.293,191.5644
line 452.484
arc 1200,165.885
spiral -90,1e20,130
arc -130,214.928
spiral 110,1e20,280
arc 280,77.151
spiral 110,280,1e20
line 100.978
96