Inclination Of The Reticle - Horizon Fitness HTS-580 Series Operation Manual

12.3 Inclination of Reticle
Inspection
1. Sight object A through the telescope and lock the horizontal and vertical
clamp screws.
2. Move object A to the edge of the field of view with the vertical tangent screw
(point A' )
3. No adjustment is necessary if object A moves along the vertical line of the
reticle and point A' is still in the vertical line.
As illustrated A ' offsets from the center and the cross hair tilts, then the reticle
needs adjustment.
Adjustment
1. If the object A does not move along the vertical line, first remove the
eyepiece cover to expose the four reticle adjusting screws.
2. Loosen the four reticle adjusting screws uniformly with an adjusting pin.
Rotate the reticle around the sight line and align the vertical line of the reticle with
point A '
3. Tighten the reticle adjusting screws uniformly, pepeat the inspection and
232